Short answer. Gutter detach and reset in Dallas means removing the gutters before a roof replacement and rehanging them after the new roof edge and drip edge are on, on new hangers at the right pitch. If the old gutters are too damaged to survive, we tell you before the reroof so new runs can be ordered in time.
Why gutters come off for a reroof
Roofers need clear access to the roof edge to install new drip edge and the first course of shingles. Gutters in the way get bent, or the new edge metal ends up behind the gutter where it does no good. Taking them down first avoids both.
Putting them back is where jobs go wrong. Old hangers do not line up with new edge metal, and a gutter rehung by eye loses its pitch. We rehang on new hidden hangers with a fresh line, and check the drip edge sends water into the trough.
What decides the cost of detach and reset
We have no sourced price range for detach and reset, so these are the factors that set yours.
- 1Linear footage
Total length to take down and rehang.
- 2Reuse versus replace
Damaged runs replaced instead of rehung.
- 3New hangers
Fresh hidden hangers for the reset.
- 4Stories
Two-story runs need more setup.
- 5Schedule changes
Extra trips if the roof job is delayed.
Coordinating with your roofer
We work to your roofer's schedule: down the day before or the morning of tear-off, back up after the edge metal and shingles are done. If the roof job slips for weather, we move with it. You get one point of contact for the gutters so nothing falls between trades.
Drip edge and new flashing
A reroof is the moment to get edge metal right. We check that new drip edge or gutter apron extends into the trough line, and that kickout flashing is in place where roof edges meet walls, before the gutters go back up.
Reuse or replace
Gutters that are straight, sound and not hail-dented can go back up. Runs that are dented, leaking or undersized are better replaced while they are already off. We tell you which before tear-off, so new runs can be formed and ready when the roof is done.
Downspout reconnection
Downspouts are reconnected with new straps and riveted elbows, and every outlet is checked for flow. If the reroof changed how the roof drains, such as a new valley or a removed cricket, we adjust outlets to match.
What detach and reset includes
- Gutters and downspouts removed without bending them
- Runs labeled and stored on site
- An assessment of what can be reused
- A check of the new drip edge before rehanging
- New hidden hangers on a fresh pitch line
- Downspouts reconnected and strapped
- A hose test of every run
Why Dallas reroofs are so common
FEMA's National Risk Index rates Dallas County Very High overall, with hail among its top hazards, and hail is the most common reason a Dallas roof gets replaced. Every one of those reroofs means gutters coming down and going back up, and getting the reset right is what keeps the new roof edge draining into the trough instead of behind it.
How detach and reset fits the roof schedule
Taking gutters down is usually a few hours, done the day before or the morning the roofers start. Rehanging is typically a day after the roof edge is complete. Between the two, the runs are stored on site, labeled so each goes back where it came from.
How detach and reset goes
Talk to the roofer
Dates set around the roof schedule.
Assess the gutters
Reuse or replace decided before tear-off.
Take them down
Runs removed and stored on site.
Check the new edge
Drip edge and flashing confirmed.
Rehang and test
New hangers, fresh pitch, hose test.
Detach and reset questions
Usually yes, so roofers can install new edge metal and shingles cleanly.
If they are straight and sound, yes. Damaged runs are better replaced while they are off.
Some do, but rehanging with the right pitch is gutter work. We coordinate with any roofer.
Yes. New hidden hangers on a fresh line, not the old holes.
We move with the roofer's schedule.
Yes. It is the most efficient time to do it.