Short answer. Half-round gutters in Dallas suit Tudors, cottages and traditional brick and stone homes, and they come in aluminum or copper. National guides put half-round gutters at about $4 to $25 per linear foot depending on material. They hold slightly less than K-style of the same width, so sizing matters.
Is half-round right for your house?
Half-round is about look first. On a 1920s Tudor or a stone cottage, a K-style gutter's molded front looks like a later addition; a rounded trough on brackets looks original. On most newer brick two-stories, K-style suits better.
Function still counts. A half-round trough holds a little less water than a K-style of the same width, so on a steep or valley-fed roof we size up or add outlets. If you want the look in its best form, copper half-round is the traditional choice.
Half-round compared with K-style
| Half-round | K-style | |
|---|---|---|
| Look | Rounded, traditional | Molded front, modern |
| Holds | A little less for its width | A little more for its width |
| Hangs on | Brackets or straps | Hidden hangers |
| Best on | Tudors, cottages, stone homes | Most newer homes |
What sets the cost of half-round gutters
Half-round is priced by the foot, with material as the biggest factor.
- 1Material
Copper costs several times more than aluminum.
- 2Brackets
Decorative exposed brackets cost more than plain hangers.
- 3Size
Larger troughs for steep or valley-fed roofs.
- 4Round downspouts
Round downspouts and elbows to match.
- 5Old gutters and fascia
Tear-off and any fascia repair first.
A national cost guide puts half-round gutters at about $4 to $25 per linear foot depending on material (Bob Vila, citing HomeAdvisor). This is a planning range, not our quote.
Aluminum half-round
Aluminum half-round gives the traditional profile at a lower cost and comes in painted finishes, including colors that resemble aged copper or bronze. It is light, does not rust, and suits most homes that want the look without the copper price.
Copper half-round
Copper half-round is the classic version: soldered joints, round copper downspouts, and a finish that darkens to brown and greens over the years. It costs several times more than aluminum and can outlast the roof. We cover it in more detail on our copper gutter page.
Hangers and brackets
Half-round runs hang from brackets screwed to the fascia or from straps fixed under the roof edge. Exposed decorative brackets are part of the look on many older homes; plain hidden hangers suit a cleaner line. Either way, spacing matters more than on K-style, especially with heavier copper.
Round downspouts
Half-round gutters pair with round downspouts and round elbows. They look right together, and a round downspout at the corner of a stone or brick house reads as part of the original trim. We size them to the run and fasten them with matching round straps.
Brands and product lines we install
Brands and product lines we install: Englert, Senox, Berger, OmniMax, Klauer, Mueller, Spectra, Gutterglove, MasterShield, Raptor, Flex-A-Spout, NDS, ADS, Zurn.
Half-round runs and brackets come from makers like Klauer and Berger, in aluminum and copper.
Half-round gutters on traditional Dallas homes
Half-round fits best on the older side of Dallas. In the M Streets, where building began in 1923 and Tudor Revival homes made up over 65 percent of the houses when the conservation district formed, a rounded trough on brackets matches the steep gables and stucco. University Park, a traditional residential neighborhood around SMU, has many rooflines where half-round reads as original rather than added.
How long a half-round install takes
An aluminum half-round install on a typical home is usually a one-day job. Copper takes longer because every joint is soldered, and exposed decorative brackets take more time to set evenly. We give you the timeline after measuring.
How a half-round install goes
Look at the house
Profile, metal and bracket style chosen to suit it.
Measure and size
Runs sized for the roof planes they drain.
Prepare the edge
Old gutters off, fascia checked.
Hang and join
Brackets set evenly, runs hung, joints sealed or soldered.
Downspouts and test
Round downspouts fitted, water run through.
Half-round gutter questions
Slightly less than K-style of the same width, so we size them for the roof.
Yes, in painted finishes, at a much lower cost than copper.
They look best with round downspouts, though rectangular can be fitted.
Not really. The rounded trough tends to flush debris well.
On Tudors, cottages and traditional homes, usually yes. On most newer homes, K-style fits better.
Yes. We offer plain and decorative bracket styles.